ADC CUDA 3 Administration Manual page 416

414 C 18: C
HAPTER ONFIGURING
C M T
ABLE ODEM ERMINATION
Display All Policies on Single Upstream Channel
You display all policies on a single upstream channel by performing the
following tasks:
Task
1. Enter interface cable mode.
2. Display the frequency hopping
policy on an upstream channel.
Example
The following example displays all policies on upstream channel 1, and
shows that there is only one policy configured.
cli:192.168.208.3:interface:cable:csi(1/1/1)# show
spectrum-group 1 upstream 1
Upstream ID
Rule Number
Threshold
Interval
Frequency (MHz)
Profile Num
cli:192.168.208.3:interface:cable:csi(1/1/1)#
S
YSTEMS
Command
interface cable <c/s/i>
show spectrum-group upstream
<port number>
1
1
1
10
5.0
1
ADC Telecommunications, Inc.