ADC CUDA 3 Administration Manual page 181

root# snmp-server context tech storage permanent status enable
root# show snmp context
row count: 3
Name
-------------------------------- ------------ ------------
adc
june
tech
cli:192.168.208.3:root#
Cuda 12000 IP Access Switch CLI-based Administration Guide
Perform the following tasks to configure SNMPv3 contexts. Refer to the
configuration example below:
Task
1. Enter configuration mode.
2. Provide the name of the
context.
Enter a single text or numeric
string, up to 32 characters.
3. Set the storage type for the
context.
By default, storage is set to
NonVolatile.
4. Set the status for the context.
By default, status is set to
enable.
5. Display all context information
for an SNMP entity.
6. Remove the context
information.
Example
The following example displays the configuration for the context "tech" and
displays all contexts for an SNMP entity.
Storage
NonVolatile
NonVolatile
Permanent
Configuring SNMP Access Control
Command
root
snmp-server context <context name>
snmp-server context [storage
{nonvolatile | permanent | readonly |
volatile}]
snmp-server context [status {enable |
disable}]
show snmp context [<context name>]
no snmp-server context <context
name>
Status
Active
Active
Active
179