ADC CUDA 3 Administration Manual page 258

256 C 12: C
HAPTER ONFIGURING
DHCP R
ELAY
To configure a DHCP Policy and a BOOTP policy, perform the following tasks:
Task
1. Enter cable interface mode. interface cable <c/s/i>
2. Create a DHCP Policy.
3. Create a BOOTP policy.
To display the DHCP or BOOTP policies currently configured on a cable
interface, perform the following tasks:
Task
1. Enter cable interface mode.
2. Display all DHCP policies.
3. Display all BOOTP policies.
4. Display a specified DHCP policy. show dhcp-policy <policy-index>
5. Display a specified BOOTP
policy.
6. Display the default DHCP policy. show dhcp-policy default
7. Display the default BOOTP
policy.
Command
dhcp-policy {<policy-index> | default} {deny |
permit} {<ip-address>... | forward-internal
[disable] } [agent-option {cm | cpe} | cmmac
<mac-address> | interface <c/s/i> | mac
<mac-address> [mask <mask>]]
[vendor-class-id {cm | mta}] [description
<string>]
bootp-policy {<policy-index> | default}
{deny mac <mac-address> [mask <mask>] ...
| permit <ip-address>... mac <mac-address>
[mask <mask>] ...} [description <string>]
Command
interface cable <c/s/i>
show dhcp-policy
show bootp-policy
show bootp-policy <policy-index>
show bootp-policy default
ADC Telecommunications, Inc.