Displaying The Event Log - ADC CUDA 3 Administration Manual

218 C 10: M
HAPTER ANAGING

Displaying the Event Log

S E
YSTEM VENTS
warning traps|syslog
notice traps|syslog
information none
debug none
cli:192.168.208.3:root# show event-config syslog
Syslog Server
cli:192.168.208.3:root#
Use this procedure to display the log of events that the Cuda has generated:
Task
1. Enter root mode.
2. Display the contents of the event
log.
The show event-log command output displays these fields of information
about each event:
Table 10-6 Event Log Fields
Field Description
Index The number of the event in the log. This number is used
to order the events in the log.
First Time The time that the log entry was created.
Last Time The time that the last event associated with the log entry
occurred. In some cases, multiple events can be associated
with a single log entry. This tends to happen when
duplicate events are reported. However, when only one
event is reported, then one event is associated with an
entry, which means that the First Time and Last Time
values are the same.
Counts The number of consecutive event instances that this event
entry reports. The count starts at 1 when the entry is
created and increments by one for each subsequent
duplicate event.
Level The event's class (emergency, alert, critical, error,
warning, notice, info, debug).
133.132.1.1
Command
root
show event-log
ADC Telecommunications, Inc.