446
C
19: M
HAPTER
ANAGING
Resetting All Modems on a Network
C
M
ABLE
ODEMS
To reset all modems attached to a selected network, perform the following
task within the interface cable <c/s/i> mode .
Task
Reset all modems on a network.
Example
The following example uses the match argument against the IP address
parameter to reset all cable modems on the 192.168.19.x subnet.
Command
cm reset <address-string> match
The IP address that you want to match
entered with a "255" wildcard mask.
For example, if you want to reset all
cable modems attached to subnet
189.23.3.x, enter the following
command:
cm reset 189.23.3.255 match
ADC Telecommunications, Inc.