Viewing Module Information; Viewing Installed Modules - ADC CUDA 3 Administration Manual

106 C 6: M
HAPTER ODULE

Viewing Module Information

Viewing Installed Modules

A
DMINISTRATION
This section provides information on how to view module information,
including:
Viewing Installed Modules
Viewing Module Versions
You can display a listing of modules and their associated interfaces currently
installed on the system by using the show topology command. To show the
current physical configuration of the system, perform the following task
from within any mode:
Task
Display system topology,
including module and
interface information.
You can pipe the output to an include utility to scope the display down to
content of interest. For example, the command show topology | include
Ethernet will scope the output to only Ethernet interfaces. Note that the
string you specify is case-sensitive.
Command
show topology
ADC Telecommunications, Inc.