ADC CUDA 3 Administration Manual page 585

Command
http-server {enable | disable}
lookup {enable | disable}
reset [{hard | soft}]
save
traffic-relay {dns | ftp | http | snmp |
snmp-trap | ssh | syslog | telnet | tftp |
time_of_day} [port <port>]
Cuda 12000 IP Access Switch CLI-based Administration Guide
Mode
root
root
slot c/s
slot
root
Chassis Commands
Description
Enables and disables the HTTP
server on the chassis.
Enables the Jini lookup service on
the chassis, which is required for
chassis group support.
Resets (reboots) the module that is
installed in the selected slot.
Persists the configuration of a
module in the current slot, or in all
chassis slots.
Configures processes, such as the
HTTP server, to send and receive
TCP or UDP packets using an
internal address on the chassis.
583