ADC CUDA 3 Administration Manual page 50

48 C 2: A
HAPTER BOUT THE
C L I
OMMAND INE NTERFACE
Table 2-3 DOCSIS Interface Mode Commands
Command
spectrum-group
sync-interval
trace-log
ucd-interval
upstream
Table 2-4 Ethernet Interface Mode Commands
Command
access-class
access-list
add
arp
bootp-policy
dhcp-authority
dhcp-policy
dhcp-relay
duplex
link-trap
negotiation
shutdown
speed
Description
Configures spectrum group rules.
Configures the time interval between synchronization
message transmissions on the downstream channel.
Configures event logging for the interface.
Configures the time interval between transmission of
successive Upstream Channel Descriptor (UCD)
messages for each upstream channel.
Configures upstream channels.
Description
Applies an access list to the current interface.
Creates an access list, which consists of IP filtering
rules.
Adds a static ARP entry for the current interface.
Sets the ARP timeout parameter.
Defines BOOTP request policies.
Adds a DHCP authority range. The command also
enables and disables DHCP authority.
Configures several parameters in the DHCP packet and
determines the list of servers to which the DHCP
packet is sent.
Configures DHCP relay agent options.
Configures the duplex mode for the interface (full
duplex, half duplex, or auto).
Enables link traps for the interface.
Configures an Ethernet port to automatically negotiate
duplex and speed.
Enables you to administratively shut down an interface.
Configures the speed for an Ethernet port.
ADC Telecommunications, Inc.