68
C
3: M
HAPTER
ANAGING
Configuring Local Authentication
Task
1. Enter root mode.
2. Enable local authentication.
3. Verify that local authentication is
enabled.
U
A
SER
CCOUNTS
By default, users are authenticated locally by the Cuda 12000 using the
accounts and access profiles you create as described earlier in this chapter. If
you configure TACACS+ or RADIUS authentication, and then decide to
change back to local authentication, perform the following tasks:
Example
cli:192.168.208.3:root# aaa authentication login default local
cli:192.168.208.3:root# show aaa
aaa authentication login default local
Command
root
aaa authentication login default local
show aaa
ADC Telecommunications, Inc.