ADC CUDA 3 Administration Manual page 486

484 C 19: M
HAPTER ANAGING
C M
ABLE ODEMS
Parameter
Enet Protocol
none
ethertype
dsap
mac
User Priority Low
User Priority High
VLAN Id
Description
Indicates the packet class Ethernet protocol. The
options are:
Parameter is ignored when considering whether a
packet matches the current rule.
Indicates the 16-bit value of the Ethertype that the
packet must match to match the rule.
Lower 8-bits of the value must match the DSAP byte
of the packet to match the rule.
Indicates the lower and upper 8-bits of this object
represent the upper and lower bound of MAC
management messages.
Applies to Ethernet frames using the 802.1P/Q tag
header. Tagged Ethernet packets must have a 3-bit
priority field within the range of the low and high
priority to match this rule.
Applies to Ethernet frames using the 802.1P/Qtag
header. Tagged Ethernet packets must have a 3-bit
priority field within the range of the low and high
priority to match this rule.
Applies to Ethernet frames using the 802.1P/Qtag
header. If this parameter is a non-zero value, tagged
packets must have a VLAN identifier that matches the
value to match the rule.
ADC Telecommunications, Inc.