Viewing Cpe Control Parameters And Cpe Devices; Viewing Cpe Control Parameters - ADC CUDA 3 Administration Manual

518 C 20: S
HAPTER UBSCRIBER

Viewing CPE Control Parameters and CPE Devices

Viewing CPE Control Parameters

M
ANAGEMENT
You can view CPE control parameters and CPE devices.
To view CPE control parameters, perform the following tasks:
Task
1. From any mode, view default
CPE control parameters.
2. From interface:cable:csi<c/s/i>
mode, view CPE control
parameters for all cable
modems using the interface.
3. From interface:cable:csi<c/s/i>
mode, view CPE control
parameters for a specific cable
modem using the interface
(specify the cable modem's
MAC address).
Command
show cpe-control
show modem cpe-control
show modem <mac-address> cpe-control
ADC Telecommunications, Inc.