300
C
14: C
HAPTER
ONFIGURING
Internal
Router
CPE ROUTER
CPE ROUTER
CPE ROUTER
Area 1
Area
Internal
Border
Router
Router
IP
OSPF requires the backbone to be contiguous to all areas in the AS. All other
non-backbone areas (areas other than area 0) must have a connection to the
backbone area. Non-backbone areas that are not contiguous to the
backbone can use virtual interfaces to connect to the backbone.
OSPF Routers
OSPF performs routing within an area and routing between areas. Different
categories of routers perform these two types of routing.
Autonomous system boundary routers (ASBRs) connect an OSPF routing
domain to another routing domain (such as RIP).
Area border routers (ABRs) are linked to more than one area, or are linked
between an area and backbone. ABRs maintain separate link-state databases
of each area in which they reside.
Internal routers are directly connected within the same area, as well as
routers with interfaces connected only to the backbone.
Figure 14-2 Shows an example of OSPF routing and router classifications.
OSPF
Routing
Domain
Area 0
(Backbone)
Area
Border
Router
Figure 14-2 OSPF Router and Routing Classifications
Internal
Router
CPE ROUTER
CPE ROUTER
CPE ROUTER
Area 2
AS
Boundary
Router
RIP
Routing
Domain
RIP
ADC Telecommunications, Inc.
Need help?
Do you have a question about the CUDA 3 and is the answer not in the manual?