Broadcasting Messages To Users - ADC CUDA 3 Administration Manual

Broadcasting Messages to Users

cli:192.168.208.3:root# talk "Testing the broadcast message feature"
@14:20:42 root@techpubs:: Testing the broadcast message feature
cli:192.168.208.3:root#
Cuda 12000 IP Access Switch CLI-based Administration Guide
The talk command enables you to broadcast messages to all chassis users
and to enable and disable the ability to broadcast messages.
To broadcast messages to users, perform the following task:
Task
From any mode, send a broadcast
message.
To enable or disable the broadcast capability, perform the following task:
Task
From any mode, enable or disable
the broadcast capability.
Example
Broadcasting Messages to Users
Command
talk <message-string>
Note that if the string contains spaces,
enclose it in quotes.
Command
talk {enable | disable}
91