Dhcp Relay Commands - ADC CUDA 3 Administration Manual

572 A A: C
PPENDIX OMMAND

DHCP Relay Commands

Command
bootp-policy <index> {deny mac
<mac-address> [mask <mask>]... |
permit <ip-address>... mac
<mac-address> [mask <mask>]... }
[description <string>]
dhcp-policy {<policy-number> |
default} {deny | permit}
{<ip-address> ... | forward-internal
[disable]} [agent-option {cm | cpe} |
cmmac <mac-address> | interface
<c/s/i> | mac <mac-address> [mask
<mask>]] [vendor-class-id {cm | mta}]
[description <string>]
dhcp-relay {enable | disable}
[cm-gateway <gi-address>]
[cpe-gateway <gi-address>]
[add-agent-options {enable |
disable}] drop-mismatch {enable |
disable}] [relay-mode {append |
replace | untouch | discard}]
[max-pkt-len <number>]
[mta-gateway <gi-address>]
[server <gi-address>]
S
UMMARY
Table A-7 DHCP Relay Commands
Mode
interface:cable:csi
interface:cable:csi
interface:cable:csi
Description
Configures BOOTP policies on the
current interface.
Configures DHCP policies on the
current interface. DHCP policies
dictate the servers to which DHCP
requests are forwarded.
Configure DHCP relay options on
the current cable interface.
Note that you configure the DHCP
relay server using the dhcp-policy
command.
ADC Telecommunications, Inc.