Configuring Snmpv3 Users - ADC CUDA 3 Administration Manual

Configuring SNMPv3 Users

Cuda 12000 IP Access Switch CLI-based Administration Guide
The SNMPv3 user is anyone who requires management operations to be
authorized by a particular SNMP entity. SNMP entities must have knowledge
of a user and the user's attributes.
Configuring an SNMPv3 user involves the following:
1. Specifying a user's name.
2. Specifying the user's security attributes for an SNMP entity.
3. Specifying the storage type for the user.
4. Specifying the status of the user.
The following table describes the parameters that you set to configure SNMP
users:
Table 9-4 Parameters Contained in SNMPv3 User Configuration
Parameter
Name
Authentication
Privacy
Configuring SNMP Access Control
Description
The name assigned to the user for the SNMP entity.
A user name may contain up to 32 alphanumeric
characters.
The security attribute for this user that indicates
whether messages sent on behalf of this user can be
authenticated. Authentication is defined by two
protocols: HMC-MD5-96 and HMAC-SHA-96.
Indicates whether messages sent on behalf of this
user will be protected from disclosure. Privacy is
defined by the CBC-DES Symmetric Encryption
Protocol.
175