Configuring Cmts Privacy Parameters; Configuring Flap Control - ADC CUDA 3 Administration Manual

428 C 18: C
HAPTER ONFIGURING

Configuring CMTS Privacy Parameters

Configuring Flap Control

C M T
ABLE ODEM ERMINATION
You can configure BPI and BPI+ privacy parameters on a cable interface.
Information on configuring both CMTS and cable modem privacy
parameters can be found in "Configuring BPI and BPI+ Parameters"
onpage 453.
Flap Control configuration sets the control of the flap list by configuring the
size and entry thresholds, as described in the following sections.
Flap-list size
The Flap-list size parameter sets the maximum number of entries (modems)
in the flap list. By default, flat-list size sets the table at 8191 rows.
Acceptable values are 0 to 8192.
You configure the maximum flap list size by performing the following tasks:
.
Task
1. Enter cable interface mode.
2. Set maximum flap table size.
S
YSTEMS
Command
interface cable <c/s/i>
flap-list size <value>
ADC Telecommunications, Inc.