Configuring Upstream Channel Parameters - ADC CUDA 3 Administration Manual

392 C 18: C
HAPTER ONFIGURING

Configuring Upstream Channel Parameters

C M T
ABLE ODEM ERMINATION
Configuring upstream channel parameters is described in the following
sections.
Upstream shutdown
The Upstream shutdown parameter sets the state of the upstream channel.
Choose Up to set the channel active, or choose Down to set the channel
inactive.
You set the upstream channel status by performing the following tasks.
Task
1. Enter interface cable mode.
2. Set the upstream channel
status to up.
or
Set the upstream channel
status to down.
S
YSTEMS
Command
interface cable <c/s/i>
upstream <port number> no shutdown
upstream <port number> shutdown
ADC Telecommunications, Inc.