Slot Mode - ADC CUDA 3 Administration Manual

56 C 2: A
HAPTER BOUT THE

Slot Mode

C L I
OMMAND INE NTERFACE
Slot mode provides access to slot-specific commands. To enter this mode,
you must specify a chassis/slot (c/s) combination that identifies the slot that
you want to administer. Within this mode, you can do the following:
Persist (save) configuration for the current module, or all modules in the
system
Configure and show trace log activity for the current slot
Reset the module contained in the slot, or all modules in the chassis.
To enter slot mode, enter slot <chassis/slot> from within any mode.
Table 2-9 lists available slot mode commands as they appear when you type
help at the command prompt. CLI global commands are not listed and can
be found in Table 2-1 on page 42. Note that the help command output
displays many commands in their abbreviated form.
Table 2-9 Slot Mode Commands
Command
copy
cpu-utilization
filter-aging
reset
save
trace-log
Description
Downloads a file from a TFTP server to flash.
Enables CPU utilization on the module.
Configures IP packet filtering for all interfaces in the
slot.
Reboots a module.
Saves the system configuration for all slots to persistent
storage.
Configures event logging for the slot.
ADC Telecommunications, Inc.