ADC CUDA 3 Administration Manual page 607

Request For
Comments (RFC)
Return Loss
RF
RF DVT
RFC
RIP
Routing
Information
Protocol (RIP)
Service Identifier
(SID)
SID
Simple Network
Management
Protocol (SNMP)
SNAP
SNMP
SOA
SOHO
SSRAM
Cuda 12000 IP Access Switch CLI-based Administration Guide
A technical policy document of the IETF; these documents can be accessed
on the World Wide Web at http://ds.internic.net/ds/rfcindex.html.
The parameter describing the attenuation of a guided wave signal (e.g., via a
coaxial cable) returned to a source by a device or medium resulting from
reflections of the signal generated by the source.
See Radio Frequency.
Radio Frequency Design Verification Test.
See Request For Comments.
Routing Information Protocol.
A routing protocol used for IP networks. The RIP protocol calculates the
shortest distance between the source and destination address based on the
lowest hop count.
A mapping between the CM and the CMTS based on which bandwidth is
allocated to the CM by the CMTS and by which COS is implemented. Within
a MAC domain, all SIDs are unique.
See Service Identifier.
A network management protocol used to monitor IP routers, other network
devices, and the networks to which they attach.
See Subnetwork Access Protocol.
See Simple Network Management Protocol.
Start of Authority record. The purpose of the soa record is to inform other
DNS servers how to treat information that the local server provides about the
domain.
Small Office Home Office
Synchronous Static RAM.
605