ADC CUDA 3 Administration Manual page 465

cli:interface:cable:csi(1/1/1)# privacy multicast ip 1 239.2.2.2 255.255.255.255
said 8192 sa-type dynamic encrypt-alg des56cbcMode authent-alg none
cli:interface:cable:csi(1/1/1)# show privacy multicast ip
row count: 1
Index IP Address
----- --------------- --------------- ----- ------- ------------ -------
1 239.2.2.2
cli:interface:cable:csi(1/1/1)# privacy multicast mac 00:10:95:04:0a:c3 said 8192
Cuda 12000 IP Access Switch CLI-based Administration Guide
You use the following commands within interface cable <c/s/i> mode to
configure and display IP multicast address mapping entries:
Task
1. Set the IP multicast address
mapping entry and its mask for
the associated SAID.
2. Remove the IP multicast address
mapping entry.
3. Set the MAC address of the CM
that is authorized to access the
defined multicast stream via the
SAID.
4. Remove the multicast MAC
entry.
5. Display IP and MAC multicast
address entries.
Example
IP Mask
255.255.255.255
Configuring BPI and BPI+ Parameters
Command
privacy multicast ip <index>
<multicast-ip-address> <mask> said
<number> sa-type {dynamic | none |
primary | static} encrypt-alg
{des40cbcMode | des56cbcMode |
none} authent-alg none
no privacy multicast ip <index>
privacy multicast mac <mac-address>
said <8192..16383>
no privacy multicast mac
<mac-address> said <8192..16383>
show [interface cable <c/s/i>] privacy
multicast {ip [<index>] | mac
[<mac-address>]}
SAID SA Type Encrypt Alg
8192 dynamic des56cbcMode
463
Authent
Alg
none