ADC CUDA 3 Administration Manual page 386

384 C 18: C
HAPTER ONFIGURING
C M T
ABLE ODEM ERMINATION
Downstream transmit-power
The Downstream transmit-power (TenthdBmV) parameter sets the nominal
output transmit power level. By default, Channel Power is set at 550
TenthdBmV. Acceptable values: 0–650.
You set the downstream output transmit power level by performing the
following tasks.
Task
1. Enter interface cable mode.
2. Set the output transmit power
level.
S
YSTEMS
Command
interface cable <c/s/i>
downstream transmit-power
<0..650>
ADC Telecommunications, Inc.