Adding The Default Route - ADC CUDA 3 Administration Manual

282 C 14: C
HAPTER ONFIGURING

Adding the Default Route

cli:192.168.208.3:root# ip route default 201.1.1.10
cli:192.168.208.3:root# show ip
row count: 8
Protocol Route
Type
-------- ------ --------------- --------------- --------------- ------ ------
Net Mgmt Remote 0.0.0.0
Local Local
Local Local
Net Mgmt Remote 199.3.2.0
Local Local
Local Local
Local Local
Net Mgmt Remote 222.2.3.0
IP
The default route is a special kind of static route. When the Cuda 12000
must forward a packet, but it cannot determine the route to the packet's
destination, the Cuda 12000 forwards the packet to the next hop associated
with the default route.
Unlike other static routes, you only have to specify the IP address of the next
hop (gateway) when adding the default route.
To add the default route, perform the following task:
Task
From any mode, add the default
route.
Example
Destination
155.144.1.0
199.3.1.0
201.1.1.0
201.1.2.0
222.2.2.0
When you display the routing table, note that the default route has a
Destination of 0.0.0.0 and a Net Mask of 0.0.0.0.
Command
ip route default <gateway-ip-address>
Net Mask Next Hop
0.0.0.0 201.1.1.10
255.255.255.0 155.144.1.1
255.255.255.0 199.3.1.1
255.255.255.0 199.3.1.3
255.255.255.0 201.1.1.1
255.255.255.0 201.1.2.1
255.255.255.0 222.2.2.2
255.255.255.0 222.2.2.1
Metric C/S/I
1 1/1/1
0 1/8/1
0 131/1/1
1 131/1/1
0 1/1/1
0 1/1/1
0 1/11/1
1 1/11/1
ADC Telecommunications, Inc.