Task
1. Remove all DHCP policies from the
current cable interface.
2. Remove all BOOTP policies from
the current cable interface.
3. Remove a specified DHCP policy
from the current cable interface.
4. Remove a specified BOOTP policy
from the current cable interface.
Cuda 12000 IP Access Switch CLI-based Administration Guide
To remove DHCP or BOOTP policies from the current cable interface, perform
the following tasks within interface cable <c/s/i> mode:
DHCP and BOOTP Policies
Command
no dhcp-policy all
no bootp-policy all
no dhcp-policy <policy number>
no bootp-policy <policy number>
257