ADC CUDA 3 Administration Manual page 51

Cuda 12000 IP Access Switch CLI-based Administration Guide
Table 2-5 POS Interface Mode Commands
Command
access-class
access-list
arp
bootp-policy
clock-source
crc
dhcp-authority
dhcp-policy
dhcp-relay
link-trap
loop
mtu
pos
ppp
shutdown
Description
Applies an access list to the current interface.
Creates an access list, which consists of IP filtering
rules.
Sets the ARP timeout parameter.
Defines BOOTP request policies.
Configures the SONET transmission clock source.
Configures cyclic redundancy checking (CRC).
Adds a DHCP authority range. The command also
enables and disables DHCP authority.
Configures several parameters in the DHCP packet and
determines the list of servers to which the DHCP
packet is sent.
Configures DHCP relay agent options.
Enables link traps for the interface.
Configures the current interface for loopback testing.
Configures the maximum transmission unit (MTU) for
the current interface.
Configures POS parameters.
Configures PPP parameters.
Enables you to administratively shut down an interface.
Command Modes 49