Viewing Privacy Keys - ADC CUDA 3 Administration Manual

464 C 19: M
HAPTER ANAGING

Viewing Privacy Keys

C M
ABLE ODEMS
To display privacy key (that is, TEK) information, perform the following task
within interface:cable:csi <c/s/i> mode:
Task
Display privacy key information.
When issued without the optional said and stats arguments, the display
includes the following parameter information:
Table 19-7 Privacy Parameters
Parameter
SAID
SA Type
Encryption Algorithm
Authentication Algorithm
Life Time
Tek Reset
Command
show [interface cable <c/s/i>] privacy
tek [said] [stats]
Description
The security association ID.
Displays the security association type
(dynamic, none, primary, or static). Refer to
"Configuring IP Multicast Address
Mapping" on page 461 for more
information on these types.
Displays the algorithm used to encrypt the
key.
No authentication algorithm is supported at
this time.
Displays the lifetime of the key, in seconds.
Specifies "true" if the TEK value range is
reset. Otherwise, this field displays "false."
ADC Telecommunications, Inc.