Viewing Alarm Information - ADC CUDA 3 Administration Manual

Viewing Alarm Information

Cuda 12000 IP Access Switch CLI-based Administration Guide
Using the show controllers pos <c/s/i> command within root mode, you
can display both the alarms that you have enabled on the POS interface, and
whether or not specific alarms have been reported.
To view the alarm reporting configuration on a POS interface, perform the
following task in root mode:
Task
View whether the reporting of
each POS alarm is enabled or
disabled.
The following example views the alarm reporting configuration for POS
interface 1/3/1:
To view the alarm reporting configuration on a POS interface, perform the
following task in root mode:
Task
View whether the reporting of
each POS alarm is enabled or
disabled.
Configuring and Viewing SONET Alarms
Command
show controllers pos <c/s/i> | include
alarm
Command
show controllers pos <c/s/i> | include
alarm
135