416
C
18: C
HAPTER
ONFIGURING
Frequency Hopping Statistics
C
M
T
ABLE
ODEM
ERMINATION
Frequency Hopping also provides statistics for you to monitor the condition
of your plant. Within interface:cable:csi mode you may view these
statistics. You can display statistics for all policies on a single channel or all
channels:
Error Rate: The percentage of errors.
Error Count: The number of frames with errors.
Total Packets: The total number of frames received for each policy.
You display statistics for all policies on a single channel by performing the
following tasks:
Task
1. Enter cable interface mode.
2. Display statistics to monitor the
condition of your plant.
You display statistics for all policies on all channels by performing the
following tasks:
Task
1. Enter cable interface mode.
2. Display statistics to monitor the
condition of your plant.
S
YSTEMS
Command
interface cable <c/s/i>
show spectrum-group stats
upstream <port number>
Command
interface cable <c/s/i>
show spectrum-group stats
upstream
ADC Telecommunications, Inc.