ADC CUDA 3 Administration Manual page 214

212 C 10: M
HAPTER ANAGING
S E
YSTEM VENTS
To configure event classes and associated reporting actions, perform the
following tasks:
Task
1. Enter root mode.
2. Assign the Default event class and
reporting action.
3. Assign the Emergency event class
and associated reporting action.
4. Assign the Alert event class and
associated reporting action.
5. Assign the Critical event class and
associated reporting action. Note:
The pipe ( | ) must be included in
the command string.
6. Assign the Error event class and
associated reporting action. Note:
The pipe ( | ) must be included in
the command string.
7. Assign the Warning event class
and associated reporting action.
Note: The pipe ( | ) must be
included in the command string.
8. Assign the Notice event class and
associated reporting action. Note:
The pipe ( | ) must be included in
the command string.
9. Assign the Information event class
and associated reporting action.
10.Assign the Debug event class and
associated reporting action.
Refer to the next section for information on viewing the event reporting
configuration.
Command
root
event-config reporting default
event-config reporting emergency
local
event-config reporting alert local
event-config reporting critical
{local|traps|syslog} {local|traps}
{local|syslog}
event-config reporting error
{local|traps|syslog} {local|traps}
{local|syslog}
event-config reporting warning
{local|traps|syslog} {local|traps}
{local|syslog}
event-config reporting notice
{local|traps|syslog} {local|traps}
{local|syslog}
event-config reporting info
event-config reporting debug
ADC Telecommunications, Inc.