ADC CUDA 3 Administration Manual page 569

Command
match {ip-address <ip-address>
<mask> | neighbor <ip-address>
<mask> |tag <tag-value> [exact |
exclude]}
override {metric <metric-value> | tag
<tag-value>
ping [-l <size>] [-n <count>] [-w
<timeout>] [-s <src-ip-address>]
<dest-ip-address>
proxy-arp
route-map <map-tag>
{permit | deny}
traceroute [-w <timeout>] [-i
<number>] [-m <number>]
[-p <number>][-q <number>] [-t
<number>] [-s <src-ip-address>]
[-x <number>] [-F] <dest-ip-address>
[<data-size>]
Cuda 12000 IP Access Switch CLI-based Administration Guide
IP Administration and Route Filtering Commands
Mode
router:ospf:import
router:ospf:export
router:rip:import
router:rip:export
router:ospf:import
router:ospf:export
router:rip:import
router:rip:export
Any
interface:cable:csi
router:ospf:import
router:ospf:export
router:rip:import
router:rip:export
Any
Description
Creates match attributes for
import and export filters.
Defines override rules for import or
export filters.
Sends ICMP echo request packets
to test network device availability.
Enables proxy ARP on the current
cable interface.
Defines route-maps for use in
map-lists for route filtering.
Traces the route that packets
traverse from the Cuda 12000 to a
destination.
567