ADC CUDA 3 Administration Manual page 576

574 A A: C
PPENDIX OMMAND
Command
flap-list insertion-time <value>
flap-list power-adj-threshold <value>
flap-list size <value>
insertion-interval <centiseconds>
map-timer <value>
modulation-profile <profile number>
interval-usage {initial | long | request
| short | station} [fec-tbytes
<number>] [fec-len <number>]
[burst-len <number>] [mod {16qam |
qpsk}] [scrambler] [no scrambler]
[diff] [no diff] [seed <number>]
[pre-len <number>]
[last-cw {fixed | shortened}]
periodic-ranging-interval <value>
plant-delay <value>
pll-state
S
UMMARY
Mode
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
interface:cable:csi
Description
Sets the cable-flap list insertion
time.
When a cable modem makes an
insertion request more frequently
than the amount of insertion time
defined by this command, the
system adds the cable modem to
the flap list for activity recording.
Sets the flap list power-adjustment
threshold.
Sets the maximum number of
entries that the system can record
in the flap list. When the number
of entries in the flap list exceeds
the number that you set with this
command, the oldest flap list
entries are aged out.
Sets the maximum amount of time
that a cable modem can request
an upstream frequency on this
CMTS interface. This initial request
is known as ranging.
Sets the map timer interval, in
microseconds, on a specific cable
interface.
Creates a cable modulation profile.
Specifies how often this cable
interface periodically invites
modems to range.
Specifies the estimated plant
propagation delay, in
microseconds.
Sets the phase lock loop state (PLL)
for the current cable interface.
ADC Telecommunications, Inc.