Configuring Snmp Trap Recipients - ADC CUDA 3 Administration Manual

206 C 10: M
HAPTER ANAGING

Configuring SNMP Trap Recipients

root# snmp-server host 136.4.6.6 informs timeout 500 retries 200 version 2c noauth
private udp-port 164 mms 5000 notification-type cold-start link-up
cli:192.168.220.230:root#
S E
YSTEM VENTS
You must define a list of IP addresses of SNMP management stations that
receive traps or syslog messages from your Cuda 12000. Use this procedure
to specify each trap recipient:
Task
1. Enter root mode.
2. Specify the trap recipient.
3. Display the trap recipient.
Example
Command
root
snmp-server host <ip-address> [traps
| informs [timeout <seconds>][retries
<retries>]] [version {1 | 2c | 3} {auth |
noauth | priv}] <community-name>
[udp-port <port>] [mms <size>]
[storage {volatile | nonvolatile |
permanent | readonly}]
[notification-type <type>...]
For information on command
arguments, refer to Chapter 9, Simple
Network Management Protocol (SNMP),
on page page 161, or see snmp-server
host command in the Cuda 12000 IP
Access Switch CLI Reference Guide.
show snmp host <ip-address>
ADC Telecommunications, Inc.