ADC CUDA 3 Administration Manual page 552

Ip access switch cli-based administration guide
Table of Contents

Advertisement

550
C
21: MIB B
HAPTER
ROWSING
Table 21-17 docsDevEvControlTable Parameters (Configuration)
.
CLI Output
Syslog Server
Threshold
Interval (seconds)
Admin Status
The options are:
unconstrained
maintainBelowT
hreshold
stopAtThreshold Causes trap transmission to cease at the threshold, and
inhibited
Inhibited
Description
IP address of the Syslog server. If the value is 0.0.0.0,
the syslog transmission is inhibited.
Number of trap/syslog events per Throttle Interval to
transmit before throttling.
Interval over which the trap threshold applies. At initial
startup, this value is one.
Controls the transmission of traps and syslog messages
with respect to the trap pacing threshold. A single
event is counted as a single event for threshold
counting. That is, an event causing both a trap and a
syslog message is still considered a single event.
Causes traps and syslog messages to transmit without
regard for threshold settings. At initial startup, this is
the default.
Causes the suppression of trap transmission and syslog
messages if the number of traps would otherwise
exceed the threshold.
not resume until you manually intervene.
Causes the suppression of all trap transmission and
syslog messages.
Indicates whether the trap and syslog transmission is
inhibited because of thresholds or the current settings
of the Throttle Admin parameter.
ADC Telecommunications, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CUDA 3 and is the answer not in the manual?

This manual is also suitable for:

Cuda 12000

Table of Contents

Save PDF