ADC CUDA 3 Administration Manual page 186

184 C 9: S
HAPTER IMPLE
System Event
Interface-related events:
link up
link down
chassis-fault
chassis-fault-cleared
Provisioning events:
duplicate-addr
isp-addr-high
isp-addr-low
ldap-failed
ldap-restored
prov-service
subnet-addr-high
subnet-addr-low
DOCSIS events:
docs-dyn-rsp-fail
N M P
ETWORK ANAGEMENT ROTOCOL
Description
Interface-related events refer to faults that
affect the link state of the interface.
Link to IP network is operational.
Link to IP network is not operational.
Auxiliary device-related event that refers to
faults associated to the fan tray, power
source and clock sources.
NOTE: Reference "Timing and Alarm
Module Fault Reporting" on page 155, for
a list of the chassis-related notification
types.
Indicates the chassis event that caused a
fault is fixed.
Provisioning events refer to faults that
pertain to the FastFlow BPM running on
the Cuda 12000.
A duplicate IP address has been detected.
The free IP address count exceeded the
upper threshold for the specified ISP.
The free address count fell below the
lower threshold for the specified ISP.
A directory server access failure occurred.
Directory server access is operational after
a failure.
A FastFlow BPM service started, stopped,
or failed.
The free IP address count exceeded the
high available address threshold for a
subnet.
The free IP address count fell below the
low available address threshold for a
subnet.
DOCSIS events refer to initialization faults
on DOCSIS and EuroDOCSIS modules.
A dynamic service response failure
occurred during the dynamic services
process.
(SNMP)
Event Class
Notice
Notice
Error
Critical
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Warning
ADC Telecommunications, Inc.