ADC CUDA 3 Administration Manual page 160

158 C 8: T
HAPTER IMING AND
A C M
LARM ONTROLLER ANAGEMENT
You Can Configure This
Signal:
Power Alarm
Temp Fault
Power Fault
PowerA Fail
PowerB Fail
Clock
To configure the alarm signals for transmit over the DB-15 connector and the
associated signals that can trigger them, perform the following tasks. By
default, all faults are configured to not send out their associated alarm
signals over the DB-15 connector:
To Provide Notification of These Faults:
local-pwr-a-fault
local-pwr-b-fault
backplane-pwr-fault
backplane-pwr-a-fault
backplane-pwr-b-fault
ps-ac-fault
ps-dc-fault
processor-temp-fault
ps-temp-fault
fan-temp-fault
local-pwr-a-fault
local-pwr-b-fault
backplane-pwr-a-fault
backplane-pwr-b-fault
ps-ac-fault
ps-dc-fault
local-pwr-a-fault
local-pwr-b-fault
bits-a-fault
bits-b-fault
red-alarm-fault
ADC Telecommunications, Inc.