Removing Ospf From Ip Interfaces - ADC CUDA 3 Administration Manual

312 C 14: C
HAPTER ONFIGURING

Removing OSPF from IP Interfaces

IP
You remove OSPF from an interface by performing the following tasks:
Task
1. Enter configuration mode for the
interface from which you want to
remove OSPF.
2. Enter the IP address of this
interface.
3. Remove OSPF from the interface.
For more information on these commands, refer to the Cuda 12000 IP
Access Switch CLI Reference Guide.
Command
interface <c/s/i>
ip address <ip-address> <mask>
no ip ospf area-id <area-id>
ADC Telecommunications, Inc.