ADC CUDA 3 Administration Manual page 144

142 C 7: P
HAPTER ACKET
O SONET A
VER DMINISTRATION
Task
1. Enable CHAP authentication.
2. If you've enable CHAP
authentication, configure the
hostname that the interface
sends to a client.
3. If you've enabled CHAP,
configure the username and
password that a requesting
client must provide for
authentication to allow the
connection.
To configure the interface to authenticate peers using PAP, then you must
add user account information for all peers that the interface may
authenticate.
When PAP is enabled for server mode, the interface requests a username and
password from the remote peer. When the peer responds with a
username/password combination, the POS interface examines its PPP LCP
Server Users Table to verify the information is correct. If the account
information is verified correct, the connection is allowed; otherwise it's
closed.
Command
To enable the use of CHAP only:
ppp authentication chap
The interface will use CHAP
authentication only; no negotiation.
To enable CHAP then PAP:
ppp authentication chap pap
The interface will negotiate the
authentication protocol to use. It will try
to agree on CHAP authentication first,
then PAP second.
To enable PAP then CHAP:
ppp authentication pap chap
The interface will negotiate the
authentication protocol to use. It will try
to agree on PAP authentication first,
then CHAP second.
ppp chap-hostname <name>
ppp username <name> password
<password>
ADC Telecommunications, Inc.