Configuring System Name, Contact, And Location - ADC CUDA 3 Administration Manual

180 C 9: S
HAPTER IMPLE

Configuring System Name, Contact, and Location

N M P
ETWORK ANAGEMENT ROTOCOL
For the Cuda 12000, you can configure system name, contact, and location
information. This information is stored in the sysName, sysContact, and
sysLocation MIB variables. This information is described as follows:
Table 9-6 System Name, Contact, and Location Parameters
Parameter
Name
Contact
Location
Perform the following tasks to configure name, contact, and location
information for the Cuda 12000:
A name, contact, or location text string may contain up to 255 alphanumeric
characters. If a text string contains spaces, you may enclose the string in
quotes.
Task
1. Enter configuration mode.
2. Specify the SNMP contact.
3. Specify the system's name.
4. Specify the system's physical
location.
5. Display the contact, name and
location information.
6. Remove the contact, name or
location information.
(SNMP)
Description
The name of the system (sysName MIB object).
The type of contact for this network (sysContact MIB
object). The contact is typically a network
administrator's name, extension, and/or e-mail address.
The physical location of the Cuda 12000 (sysLocation
MIB object).
Command
root
snmp-server contact <contact>
snmp-server name <name>
snmp-server location <location>
show snmp
no snmp-server {contact | name |
location}
ADC Telecommunications, Inc.