Viewing Event Reporting Configuration - ADC CUDA 3 Administration Manual

Viewing Event Reporting Configuration

Cuda 12000 IP Access Switch CLI-based Administration Guide
You may view the event reporting configuration. The output includes event
reporting configuration for all current event classes.
To view the current event reporting configuration, perform the following
tasks:
Task
1. Enter root mode.
2. Display current event reporting
configuration
Example
The following example displays the current event reporting configuration.
cli:192.168.208.3:root# show event-config reporting
Event Reporting Priorities
--------------------------
row count: 8
Priority Action
----------- ------------------
emergency local
alert local
critical local|syslog
error local|traps
warning local|traps|syslog
notice local|traps|syslog
information none
debug none
cli:192.168.208.3:root#
Event Reporting
Command
root
show event-config reporting
213