ADC CUDA 3 Administration Manual page 248

246 C 12: C
HAPTER ONFIGURING
DHCP R
ELAY
Table 12-1 describes the fields shown in the display.
Table 12-1 DHCP-Relay Display Fields
Field
dhcp-relay: [enabled or disabled]
Add Agent Options
Drop Mismatch
Max Pkt Len
Relay Mode
giAddresses
To configure which DHCP servers the CMTS forwards requests to, use the
dhcp-policy command. Using DHCP Policies, you can configure the DHCP
Relay agent to forward requests to a list of up to 32 DHCP servers. For more
information, see "Configuring DHCP and BOOTP Policies" on page 253.
Description
Indicates whether or not the DHCP
Relay is enabled on this cable
interface.
Indicates whether Agent Options are
enabled on this cable interface.
Indicates whether the Drop Mismatch
options is enable or disabled.
Maximum packet length allowed to
be relayed.
DHCP Relay mode configured on this
interface.
Indicates the IP gateway that is used
by:
Cable modems (CM)
CPE devices attached to this cable
interface
MTA devices
ADC Telecommunications, Inc.