ADC CUDA 3 Administration Manual page 462

460 C 19: M
HAPTER ANAGING
cli:192.168.208.3:interface:cable:csi(1/1/1)# privacy base cert-trust trusted
cli:192.168.208.3:interface:cable:csi(1/1/1)# privacy base
enable-cert-validity-periods true
cli:192.168.208.3:interface:cable:csi(1/1/1)# privacy cm-cert 00:10:95:04:0a:c3
trusted certificate cm64.cer
cli:192.168.208.3:interface:cable:csi(1/1/1)# privacy ca-cert 5 trusted
certificate manf64.cer
C M
ABLE ODEMS
You use the following commands to configure and display trust and validity
for certificates. Note that all of these commands are issued from within
interface cable <c/s/i> mode, except for privacy ca-cert and privacy
cm-cert. These two commands can be issued from within either interface
cable <c/s/i> mode or root mode.
Task
1. Set the trust for all new
self-assigned manufacturer
certificates.
2. Set the certificates to have (true)
or not to have (false) the validity
period checked against the
current time of day.
3. Display the certificate settings for
the specified cable modem.
4. Assigns a certificate to a
provisioned cable modem.
5. Remove the certificate
assignment for the provisioned
cable modem.
6. Specify manufacturer certification
authority certificates.
7. Remove the manufacturer
certification authority certificate.
Example
Command
privacy base cert-trust
{trusted | untrusted}.
privacy base
enable-cert-validity-periods
{true | false}
show [interface cable <c/s/i>] privacy
cm-cert [<mac-address>] {learnt |
provisioned [details]}.
privacy cm-cert <mac-address>
[{trusted | untrusted}] certificate
<filename>
no privacy cm-cert <mac-address>.
privacy ca-cert <1..10000> {trusted |
untrusted | chained | root} certificate
<filename>
no privacy ca-cert <1..10000>
ADC Telecommunications, Inc.