ADC CUDA 3 Administration Manual page 239

Task
4. Define that match criteria for this
route map.
5. Define the override criteria that
you want the system to apply to
any routes that match.
6. Optional: You can then verify the
route map with the show
route-map command.
Cuda 12000 IP Access Switch CLI-based Administration Guide
Creating Route Maps
Command
match {ip-address <ip-address> <mask> |
tag <tag-value> {exact | exclude} |
interface-address <ip-address> |
peer-mask <mask> |
specific <specific-value> |
route-owner {none |
connected |
ospf |
ospf-ext |
static |
special |
bgp-ext |
bgp-int |
}
Note that a "connected" route is a local route
(a route to a directly connected network).
override {metric <metric-value> |
tag <tag-value>}
show route-map <map-tag>
237