Required Equipment For Oscilloscope Calibration - Keysight U7233A Testing Notes

13 Calibrating the Infiniium Oscilloscope and Probe

Required Equipment for Oscilloscope Calibration

To calibrate the Infiniium oscilloscope in preparation for running the DDR1 automated tests, you
need the following equipment:
•
•
•
•
•
BNC
Shorting Cap
(Used to calibrate
54850A series
oscilloscopes)
Figure 53
170
Keyboard, qty = 1, (provided with the Keysight Infiniium oscilloscope).
Mouse, qty = 1, (provided with the Keysight Infiniium oscilloscope).
Precision 3.5 mm BNC to SMA male adapter, Keysight p/n 54855-67604, qty = 2 (provided with
the Keysight Infiniium oscilloscope).
Calibration cable (provided with the 54850A, 8000, 80000 or 90000A series Infiniium
oscilloscopes). Use a good quality 50
BNC shorting cap (provided with the 54850A series Infiniium oscilloscopes).
Accessories Provided with the Keysight Infiniium Oscilloscope
Ω
BNC cable.
Precision 3.5 mm Adaptors (2)
DDR1 Compliance Testing Methods of Implementation
Calibration Cable
(Used to calibrate 54850A,
80000 and 90000A series
oscilloscopes)