Keysight U7233A Testing Notes page 55

5
6
7
8
Figure 13
9
DDR1 Compliance Testing Methods of Implementation
In the DDR1 Test Application, click the Set Up tab.
Select the Speed Grade options. For the Single-Ended Signals AC Input Parameters Tests, you
can select any speed grade within the selection: DDR1-200, DDR1-266, DDR1-333, DDR1-400.
Type in or select the Device Identifier as well as User Description from the drop-down list. Enter
your comments in the Comments text box.
Click the Select Tests tab and check the tests you want to run. Check the parent node or group to
check all the available tests within the group.
Selecting Single-Ended Signals AC Output Parameters Tests
Follow the DDR1 Test Application's task flow to set up the configuration options (see
run the tests and view the tests results.
Single-Ended Signals AC Output Parameters Tests 4
Table 17),
55