Front axle
Measure from road contact surface to the lower edge of the hexagon−head bolt of the tension−strut screw
connection on the body!
Rear axle
Measure from wheel contact surface to the locating bore in the rear−axle side section (between toe and
camber eccentrics)!
Wheel alignment
WARNING
Danger of injury and damage to property due to malfunctions in the PSM control range if the steering angle
sensor is not calibrated or is calibrated incorrectly!
•
Calibrate steering angle sensor with wheels in straight−ahead position with the Porsche System Tester
2!
•
The steering angle sensor actual value must be checked after a suspension alignment which resulted in
no changes being made to the wheel alignment values!
Note
Only check or adjust wheel−alignment values when prescribed preconditions are met!
•
Front axle
einordnung
268