Porsche 996 TT Repair Manual page 589

Unscrew upper hexagon−head bolt, lift intake pipe out of the shaft bolt and remove rearwards. Remove
and dispose of seal.
15. Disconnect coolant hose with commercially available hose clip.
16. Unscrew spring band clamp or hose clamp on the coolant expansion tank.
17. Prepare auxiliary hose (internal diameter ) and a length of approx. 1 metre.
18. Pull off disconnected coolant hose, push auxiliary hose onto the supports and collect coolant in a
container.
19. Disconnect electrical plug connection from the sensor for the coolant−level indicator.
20. Undo the hexagon nut.
21. Pull coolant expansion tank out of the guide rails and remove rearwards.
top of page
Removal
einordnung
526