Front Axle - Porsche 911 GT3 Cup 2018 Techical Manual

3.2 Front axle

Chassis
3.2.1
A MacPherson strut with gas pressure shock absorbers is installed on the front axle
and attached to the body by a Uniball joint in the strut bearing. A blade-type anti-roll bar
that is adjustable on both ends has a controlled impact on the vehicle's rolling behavior.
The double shear connection of the control arm and tie rod to the wheel mount as well
as a stiffer shock absorber clamp increase the wheel mount's overall stiffness. The
use of high performance joint bearings in all control arms minimizes play, and unwanted
elastokinematic effects are greatly reduced.
The spring assembly, arranged concentrically on the MacPherson strut, consists of a
main spring and a helper spring. The vehicle height can be adjusted continuously using
the thread adjustment of the lower spring seat.
911 GT3 Cup (991 II)
Version: 4/20/2018
174
MY 2018