Porsche 996 TT Repair Manual page 671

22. Check whether locking clips are properly seated.
23. Fit coolant hoses. Always replace O−rings on the coolant hoses. Wet O−rings with plenty of water.
Note
Never fit dry; only use water.
•
24. Push on coolant hose. Align the flange of the coolant hose as shown in the illustration (lug/groove). Press
the coolant hose firmly against the connection neck. The coolant hose must engage audibly. Then recheck
whether it is fitted properly by tilting and pulling on it.
25. Fit air−conditioning compressor. Do not forget the spacer sleeve.
26. Install throttle body.
27. Install generator.
28. Install hydraulic pump.
29. Fit drive belt (service No.: 13 78 19).
30. Install air cleaner assembly.
31. Bleed the cooling system. Use the Porsche System Tester 2 for this purpose. Select the "Special
functions" menu
32. Bleed the steering system. (Group 48)
33. Bring the engine to operating temperature and check it for leaks.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installation
einordnung
608