Disassembly And Assembly Instructions; Disassembly - Porsche 996 TT Repair Manual

part)
5 Spring plate 1
6 Stop plate 1
7 Washer 1
8 Additional 1
spring
9 Protective 1
bellows
10 Coil spring 1
11 Vibration 1
damper
12 Spring plate, 1
bottom
13 Snap ring 1
top of page

Disassembly and assembly instructions

Disassembly

CAUTION
Danger of injury due to spring tensioning!
• Never use an impact bolter to loosen or tighten the fastening nut!
• Use commercially available changeover ratchet!
Note
Observe the correct allocation (running gear version) when installing new springs and/or dampers!
•
It is recommended to replace the coil springs only in pairs!
•
• If the coil springs are exchanged, it might be necessary to use a different spring plate than before!
Disassembly and assembly instructions
einordnung
plate No. 5.
Mount in correct position (No. 2 and
No. 6 are identical parts).
Mount on protective bellows (No. 9)
Observe allocation as per Spare
Parts Catalogue.
Observe allocation as per Spare
Parts Catalogue.
The vibration dampers for the right
and left sides are identical parts.
Fit in correct position (groove facing
snap ring).
Ensure perfect seating.
348