11. Check function of parking brake and adjust if necessary.' 46 83 16 Adjusting parking brake shoes.
12. Insert support bracket sleeve on the selector lever cable in the support bracket on the selector
support. Make sure the two plastic clips engage properly. (See enlarged view)
13. Push selector lever cable all the way back (see enlarged view); this shifts the transmission into park.
14. Move selector lever to position P.
15. Engage the selector lever cable into the open adjuster and close the adjuster (see enlarged view).
The locking sleeve on the adjuster must move to the end position automatically.
16. Install centre console.' 68 17 19 Removing and installing centre console.
17. Install selector knob.' 37 04 19 Removing and installing selector knob.
top of page
Tightening torques
Location
Parking brake console
Transmission support
Transmission holder
Tightening torques
einordnung
Thread
Tightening torque Nm (ftlb.)
M8
M10
M8
23 (17)
65 (48)
23 (17)
744