Porsche 996 TT Repair Manual page 645

10. Tighten the two sheetmetal nuts on the heat shield.
11. Reconnect the two hose connections. Make sure that the clips are properly inserted when doing this. Press
in the hose support until it is heard to engage.
12. Carry out oil level and tightness test.
Note
• Conclude by carrying out oil level and tightness test.
Location
Turbocharger on the exhaust manifold
Exhaust manifold on the cylinder head
1.
stage
2.
stage
Turbocharger on the exhaust catalytic converter
Oil inlet line
Oil return line
Turbocharger support
Oil inlet line on the turbocharger
Fastening screws on charge air cooler
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installing turbocharger
einordnung
Thread Tightening torque Nm (ftlb.)
M8
M8
M16 x 1.5
M16 x 1.5
M8
M8
23 (17 ftlb.)
25 (19 ftlb.)
33 (24.5 ftlb.)
30 (22 ftlb.)
30 (22 ftlb.)
30 (22 ftlb.)
23 (17 ftlb.)
20 (15.0 ftlb.)
23 (17 ftlb.)
582